ORIGIN 8GB DDR4 3200 UDIMM (1X

Origin Storage 8GB 1 x 8GB DDR4 3200MHz UDIMM Memory

The Origin Storage Matched Memory memory provides 8GB of DDR4 capacity across 1 x 8GB. Operating at up to 3200MHz, it is designed for gaming PCs, creator systems, home computers and compatible desktop workstations that need reliable memory bandwidth and responsive multitasking.

The 288 pin UDIMM format, unbuffered architecture and green pcb finish make it a clearly defined upgrade for the compatible platform. Selecting memory by exact type, capacity and platform support is essential because desktop UDIMM, laptop SODIMM and server RDIMM products are not interchangeable.

Key Features

• 8GB total memory capacity
• 1 x 8GB module configuration
• DDR4 memory operating at up to 3200MHz
• PC4 25600
• Memory timings: CL22
• Operating voltage: 1.20V
• JEDEC standard operation
• Unbuffered
• Non ECC
• No heat spreader
• 1Rx8 single rank
• Designed as a dependable desktop and workstation memory upgrade with broad system compatibility
• Limited lifetime manufacturer warranty

Capacity and Module Configuration

The total capacity is 8GB, supplied as 1 x 8GB. As a single module, it can provide a direct capacity upgrade while leaving other compatible memory slots available. Adding another module later should be done with a closely matched or identical specification.

Memory Speed and Bandwidth

The memory is rated for up to 3200MHz, corresponding to PC4 25600. Higher memory bandwidth can assist frame consistency, application responsiveness, content creation and data intensive workloads, although the benefit depends on the processor and software.

Timings and Operating Voltage

The listed timing specification is CL22 at 1.20V. Memory timings describe the number of memory cycles used for key operations. Lower timings can reduce latency, while higher transfer rates increase bandwidth. Overall performance depends on both figures and the system platform.

Memory Profiles and BIOS Setup

The module follows the JEDEC standard operation. Compatible systems normally detect the supported settings automatically through the module's SPD information.

Cooling and Physical Design

No heat spreader. The heat spreader helps move heat away from the memory chips during sustained high speed operation.

Clean Non RGB Design

The modules use a clean Green PCB finish without integrated lighting, making them suitable for understated systems or builds where case and fan lighting provide the main visual effect.

Error Correction and Reliability

This standard desktop module is non ECC memory and is intended for compatible consumer and business motherboards. Designed as a dependable desktop and workstation memory upgrade with broad system compatibility.

Compatibility

This is a 288 pin UDIMM desktop memory product. The motherboard must support DDR4; DDR4 and DDR5 modules use different electrical and physical keying and cannot be installed in the other standard's slot. Memory support lists and maximum capacities should be checked on the motherboard or system manufacturer's website before ordering.

Installation Guidance

Switch the computer off, disconnect mains power and discharge static electricity before fitting memory. Open the retaining clips, align the keyed notch and press evenly until the module is fully seated. After installation, check that the correct capacity is detected in the UEFI or BIOS before enabling any performance profile.

Core Specification

Physical and Product Information

Ideal For

• Gaming PC upgrades
• Streaming and content creation
• Photo and video editing
• Everyday multitasking
• New custom PC builds

Package Contents

• 1 x 8GB memory module configuration
• Product documentation where supplied

Please note: Mixing separate memory kits is not guaranteed to operate at the advertised speed, even when the model numbers appear similar. Maximum memory speed and capacity depend on the processor, motherboard, BIOS, number of installed modules and memory controller quality.